• G. Gilbert, L. Chow, D. Bouchard and M.M.A. Salama, April 2010, “Soil model determination using asymptotic approximations to Sunde's curves”, to be Published in 2010 IEEE PES Transmission and Distribution Conference, New Orleans, USA
• Walid A. Omran, Mehrdad Kazerani and M. M. A. Salama, October, 2009, "Impacts of Large Grid-Connected PV Systems," 2009 CIGRE Canada conference on Power Systems, Toronto, Canada.
• Walid A. Omran, Mehrdad Kazerani, and M. M. A. Salama, Sept. , 2009 “A Study of the Impacts of Power Fluctuations Generated from Large PV Systems”, 2009 IEEE PES/IAS Conference on Sustainable Alternative Energy, Valencia, Spain.
• Mohab Elnashar, Ramadan El-Shatshat, and M.M.A. Salama, July 2009, “Optimum planning of large distributed resources in a mesh connected system based on artificial neural networks”,2009 IEEE, PES General Meeting, Calgary, Canada
• Y. Atwa, and E.F. El-Saadany, R. Seethapathy, M.M.A. Salama, Sept. 2008 “Effect of Wind-Based DG Seasonality and Uncertainty on Distribution System Losses”, North American Power Symposium NAPS08, Calgary, Canada.
• Elnashar,. M Kazerani,. R El Shatshat,. M.M. A Salama,. June 2008, “Comparative evaluation of reactive power compensation methods for a stand-alone wind energy conversion system” IEEE Power Electronics Specialists Conference, 2008. PESC 2008, pp.4539 – 4544
• A.M. Gaouda, A.H. El-Hag, M.M.A. Salama, April 2008, ”Partial discharge monitoring in a noisy environment” International Conference on Condition Monitoring and Diagnosis, CMD 2008, Begin, China, pp. 1048 - 1051
• Ahmed E. B. Abu-Elanien, and M. M. A. Salama, Nov. 2007, “An Intelligent-Based Technique for Locating Switched Capacitors in Distribution Systems Using High Frequency Transients”, 4th International Conference on Innovations in Information Technology (IIT2007), Dubai, UAE.
• Ahmed E. B. Abu-Elanien, and M. M. A. Salama, October 2007, “Survey on the Transformer Condition Monitoring”, Large Energy System Conference on Power Energy, LESCOPE 2007, Montreal Quebec, Canada, pp. 187-191
• T.H.M El-Fouly, E.F. El-Saadany, M.M.A. Salama, June 2007, “Voltage Regulation of Wind Farms Equipped with Variable-Speed Doubly-Fed Induction Generators Wind Turbines”, IEEE Power Engineering Society General Meeting, Tampa, Fl, USA, pp.1-8.
• M. A. Eldery, E. F. El-Saadany,; M. M. A. Salama, May 2007, “Adjustable Speed Drive Stability Affected By DSTATCOM” IEEE International Conference on Electrical Machines & Drives IEMDC ’07, Antalya, Turkey, pp. 614-617
• C. P. Lawrence, M. M. A. Salama, R. A.El Shatshat, April 2007 “Optimization of a Fuel-Cell EV Air-Conditioning System”, IEEE Canadian Conference on Electrical and Computer Engineering (CCECE’07), Vancouver, BC, Canada, pp. 1499 – 1502
• E.F. El-Saadany, H. H. Zeineldin and M.M.A. Salama, Feb. 2007, “Micro-Grid Operation of Distributed Generation: Benefits and Challenges", International Conference on Communication, Computer & Power (ICCCP'07), , Muscat, Oman, pp. 259-264
• M.A. Eldery, E.F. El-Sadaany, M.A.A. Salama, June 2006, “An On-Line Measurement of Symmetrical Components Utilizing the Energy Operator ", accepted for presentation in IEEE Power Engineering Society General Meeting, Montreal, Canada
• H.H Zeineldin, E.F. El-Saadany, M.M.A. March 2006, “Distributed Generation Micro-Grid Operation: Control and Protection”, Submitted to  to Adly Girgis
• T.H.M. El-Fouly, E. F. El-Saadany, M. M. A. Salama, T.K. Abdel-Galil, and I.O. Habiballah, October 2005, “Power Transmission Lines Generated Electric and Magnetic Fields Calculations,” The proceedings of the COMSOL Multiphysics Conference 2005, Cambridge, USA. pp. 255 – 260
• M. I. Marei, S. Lambert, R. Pick, M. M.A. Salama, September 2005, “DC/DC Converters for Fuel Cell Powered  Hybrid Electric Vehicle”, 2005 IEEE Vehicle Power and Propulsion (VPP) Conference, Illinois Institute of Technology, Chicago, IL, USA, pp 556-559
• M. Wei, M. I. Marei, M.M.A. Salama, July 2005 “Designing Energy Storage Systems for Hybrid Electric Vehicles,” Canadian Design Engineering Network Conference CDEN, Kananaskis, Alberta, Canada.
• H. Zeineldin, E. El-Saadany, M. Salama June 2005, “Optimal Coordination of Directional Overcurrent Relay Coordination”, IEEE Power Engineering Society General Meeting, San Francisco, Ca, pp
• H. Zeineldin, E. El-Saadany, M. Salama June 2005, Impact of DG Interface Control on Islanding Detection”, IEEE Power Engineering Society General Meeting, San Francisco, Ca.,   pp.
• M.A. Eldery, E.F. El-Sadaany, M.A.A. Salama, June 2005, "Effect of distributed generator on the allocation of D-STATCOM in distribution network" IEEE Power Engineering Society General Meeting, San Francisco, Ca., pp. 181 – 185
• H. Zeineldin, E. El-Saadany, M.M.A. Salama, June 2005, “Intentional Islanding of Distributed Generation”, IEEE Power Engineering Society General Meeting, San Francisco, Ca,  pp
• T.H.M. El-Fouly, E.F.El-Saadany, M.M.A. Salama, May 2005 “A Novel Technique for Wind Speed Forecasting Using Grey Predictor”, Proceedings of the 10th  Americas Conference on Wind Engineering (10ACWE). Louisiana, USA.
• T.H.M El-Fouly, E.F.El-Saadany, M.M.A.Salama, May 2005 “Voltage Regulation of a Stand Alone Variable-Speed Wind Turbine Equipped with Self-Excited Induction Generator” Proceedings of the World Renewable Energy Congress “WREC 2005”. Aberdeen, Scotland.
• M.A. Eldery, E.F. El-Sadaany, M.A.A. Salama, Sept. 2004, "Optimum number and location of power quality monitors”, 11th International Conference on Harmonics and Quality of Power, Lake Placid, New York, NY, pp. 50 - 57
• H.H. Zeineldin, E.F. El-Saadany, M.M.A. Salama, July 2004, “A novel problem formulation for directional overcurrent relay coordination” 2001 Large Engineering System Conference on Power Engineering, LESCOPE’04,  Halifax, Nova Scotia, Canada,  vol. 1, pp. 48-52
• Walid El-Khattam, Y.G.Hegazy and M.M.A Salama, June 2004,  “Stochastic Estimation of the Contribution Levels of Customer Operated Distributed Generation,” IEEE Power Engineering Society Meeting, pp. 119–128
• M. A. El-Dery, M. Marei, T. K. Abdel-Galil, E. F. El-Saadany, and M. M. A. Salama, June 2004 “ A virtual instrument for voltage flicker tracking, ” Power Engineering Society General Meeting 2004, pp. 918 - 922
• H. Zeineldin, M. Marie, E. El-Saadany, M. Salama, June 20, 2004, “Safe Controlled Islanding of Inverter Based Distributed Generation”, IEEE Power Engineering Specialist Conference PESC04, Vol. 4, pp. 2515-2520.
• R. Elshatshat;  M. Kazerani, M.M.A. Salama, May 2004, “On line tracking and mitigation of power system harmonics Using Adline-based active power filter system” IEEE Canadian Conference on Electrical and Computer Engineering (CCECE’04), Niagra Falls, Canada, Vol. 3 , pp. 2119-2124.
• M. A. El-Dery, E. F. El-Saadany, M. A. Salama, Dec. 2003, “Parameters Identification of Sectional Winding High Frequency Transformer Model Using Neural Network”, The 64th Midwest Symposium on Circuit and Analysis,  Cairo, Egypt.
• S. Mohamed, M.M.A. Salama, R. Mansour Dec. 2003,”Automatic network Synthesis utilizing MAPLE”, The 64th Midwest Symposium on Circuit and Analysis,  Cairo, Egypt, Vol. pp.
• S. Mohamed, T.K. Abdelgalil, E.F. El-Sadaany, M.M.A. Salama, Dec. 2003,”ANN technique for fault location estimation using TLS-ESPRIT”, The 64th Midwest Symposium on Circuit and Analysis,  Cairo, Egypt,
• W. King, C. Canizares, M.M.A. Salama, Oct. 2003, “Reliability effects of intentional islanding on backup distributed generation systems” 35th North American Power Symposium, Rolla, Missouri, Vol. , pp.
• W. El-Khattam, A. El-Nady, M.M.A. Salama, Sept. 2003, “Distributed generation impact of on the dynamic voltage restorer rating” 2003 IEEE/PES Transmission & Distribution Conference & Exposition, Dallas, Texas, Vol. 1, pp 415-420.
• M.I. Marei, T.H.M. El-Fouly, E. F. El-Saadany and M. M. A. Salama, July, 2003 “A Flexible Wind Energy Scheme for Voltage Compensation and flicker Mitigation, IEEE-PES General Meeting 2003, Toronto, Canada, Vol. 1, pp
• A. El Nady, M.M.A. Salama, M. Kazerani, June 2003, “An efficient compensator for the voltage related power quality problems in distribution systems”, 34th, IEEE Power Electronics Specialists Conference, Acapulco, Mexico, Vol. 1, pp. 1235- 1241.
• M.I. Marie, E. El Saadany, M.M.A. Salama, June 2003, “An efficient control of the series compensator for sag mitigation and voltage regulation”,  34th, IEEE Power Electronics Specialists Conference, Acapulco, Mexico, Vol.1, pp. 1242 – 1247.
•  T.H.M El-Fouly, E.F El-Saadany, M.M.A Salama, A.Y Chikhani, May 2003 “Compensation for load and speed variation of self-excited induction generator”, IEEE Canadian Conference on Electrical and Computer Engineering (CCECE’03), Montreal, Canada, Vol. 1 , pp 363 366.
• M.T Marei, E.F El-Saadany, M.M.A Salama, May 2003, “Dynamic performance of an enhanced STATCOM current control scheme for reactive power compensation”, IEEE Canadian Conference on Electrical and Computer Engineering (CCECE’03), Montreal, Canada, Vol.1  , pp. 359- 362 .
• A Elnady, M.M.A Salama, May 2003,” A novel mitigation strategy for voltage fluctuations produced by arc furnace” IEEE Canadian Conference on Electrical and Computer Engineering (CCECE’03), Montreal, Canada, Vol.1  , pp. 447 450.
• M.I. Marei, E.F. El-Saadany and M.M.A. Salama, Feb., 2003 “An Intelligent Control Technique for the DG Interface to Mitigate Voltage Flicker,” in Proc. of 18th Annual IEEE Applied Power Electronics Conference (APEC), Florida, USA, Vol. 1 , pp. 179-183.
•  M. I Marei, E.F El-Saadany, M.M.A Salama, July 2002,” Flexible distributed generation: (FDG)” IEEE Power Engineering Society Summer Meeting, Chicago, USA, Vol. 1, pp. 49 -53.
• M. I Marei, E.F El-Saadany, M.M.A Salama, July 2002, “A new contribution into performance of active power filter utilizing SVM based HCC technique”, IEEE Power Engineering Society Summer Meeting, Chicago, USA, Vol. 1, pp. 1022 -1026
• T.K Abdel-Galil, E.F EL-Saadany, A.M Youssef, M.M.A Salama, July 2002, “On-line disturbance recognition utilizing vector quantization based fast match”, IEEE Power Engineering Society Summer Meeting, Chicago, USA, Vol. 1, pp. 1027 -1032.              
• Y. Hegazy, M.M.A. Salama, A.Y. Chikhani, March 2002, “Distributed generation and distribution system reliability”, Power System 2002 Conference: Impact of Distributed Generation, Clemson, South Carolina, USA, pp. TA1:1-5.
• J. Lui, M.M.A. Salama, R.R. Mansour, March 2002, “The Impact of distributed generation on ATC”, Power System 2002 Conference: Impact of Distributed Generation, Clemson, South Carolina, USA, pp. TB1: 1-5.
• W. El Khatam, M.M.A. Salama, March 2002, “Impact of distributed generation on voltage profile in deregulated distributed systems”, Power System 2002 Conference: Impact of Distributed Generation, Clemson, South Carolina, USA, pp. TB1: 6-11.
• J. Lui, M.M.A. Salama, R.R. Mansour, March 2002, ”The correlation between distributed generation and load elasticity in distribution systems” Power System 2002 Conference: Impact of Distributed Generation, Clemson, South Carolina, USA, pp. TA2: 1-5.
• A Elnady, W. El-khattam,  M.M.A Salama, January 2002,” Mitigation of AC arc furnace voltage flicker using the unified power quality  conditioner” IEEE Power Engineering Society Winter Meeting,  New York, USA, Vol. 2, pp. 735 –739.
• T.K. Abdel-Galil, E.F. El-Saadany , M.M.A. Salama, January 2002, ”Power quality assessment in deregulated power systems” IEEE Power Engineering Society Winter Meeting,  New York, USA, Vol. 2, pp. 952 –958.
• T.K. Abdel-Galil, E.F. El-Saadany , M.M.A. Salama, January 2002, “Energy operator for on-line tracking of voltage flicker levels”, IEEE Power Engineering Society Winter Meeting,  New York, USA, Vol. 2, pp. 1153 –1157.
• M.I. Marei, E.F. El-Saadany , M.M.A. Salama, January 2002, ”A novel current regulated PWM technique for multi-converter active power”, IEEE Power Engineering Society Winter Meeting,  New York, USA, Vol. 2, pp. 1360 –1365.
• T.K. Abdel-Galil, E.F. El-Saadany and M.M.A. Salama, October 2001,  “Effect of new deregulation policy on power quality monitoring and mitigation techniques”, IEEE Transmission and Distribution Conference (TD’01), Atlanta, USA, pp. 544-560.
• E.F. El-Saadany, T.K. Abdel-Galil and M.M.A. Salama, October 2001,  “Application of wavelet transform for assessing power quality in medium voltage industrial distribution systems”, IEEE Transmission and Distribution Conference (TD’01), Atlanta, USA, pp. 427- 432.
• Elnady, A.; Salama, M.M.A October 2001,  “New functionalities of the unified power quality conditioner”, IEEE Transmission and Distribution Conference (TD’01), Atlanta, USA, pp. 415 -420
• T.K. Abdel-Galil, E.F. El-Saadany and M.M.A. Salama, October 2001, “Implementation of different mitigation techniques for reducing harmonic distortion in medium voltage industrial distribution systems” IEEE Transmission and Distribution Conference (TD’01), Atlanta, USA, 561- 566.
• A. Elnady, M.M.A. Salama, July 2001, “New functionality of an adaptive unified power quality conditioner”, IEEE Power Engineering Society, Summer Meeting, Vancouver, British Columbia, Canada, pp. 295- 300.
• E.F. El Saadany, M.M.A. Salama, July 2001, “PWM based ASD harmonic suppression utilizing reactance one port compensator” IEEE Power Engineering Society, Summer Meeting, Vancouver, British Columbia, Canada, 289- 294.
• R. El-Shatshat, M. Kazarani, M.M.A. Salama, July 2001, “ Rule-based controller for modular active power filters”,  2001 Large Engineering System Conference on Power Engineering, LESCOPE’01,  Halifax, Nova Scotia, Canada,  pp 195- 200.
• E.F. El-Saadany, T.K. Abdel-Galil and M.M.A. Salama, 2001,  “Medium voltage industrial distribution system power quality assessment utilizing multi-resolution decomposition techniques”, IEEE Canadian Conference on Electrical and Computer Engineering (CCECE’01), May 2001, Toronto, Canada
• A. Elnady, A. Goauda, M.M.A. Salama, April 2001 “Unified power quality conditioner with a novel control algorithm based on wavelet transform”, IEEE 2001 Canadian Conference on Electrical and Computer Engineering CCECE’01, Toronto, Ontario, Vol. 2, pp. 1041 –1045.                    
• E.F. El-Saadany, T.K. Abdel-Galil, M.M.A. Salama, April 2001, “Medium voltage industrial distribution system power quality assessment utilizing malti-resolution decomposition techniques” IEEE 2001 Canadian Conference on Electrical and Computer Engineering CCECE’01, Toronto, Ontario, Vol. 2, pp. 869 –874.
• H. El-Hag, S. Jayaram, M. M. A. Salama, October 2000, “Modeling Transformer Core Non-Linearity”, 32nd Annual North American Power Symposium (NAPS 2000), Waterloo, Ontario, Canada, Vol. II, pp. 14-7, 14-9.
• Kannan.S, S.Jayaram,  M.M.A.Salama, October 2000, “De-coupled control design of a shunt compensator: Design and performance”, 32nd  Annual North American Power Symposium (NAPS 2000), Waterloo, Ontario, Canada, Vol. II, pp. 12-8, 12-13.
• Luiz. Meyer, M.M.A. Salama, S. Jayarama, October 2000, “Distribution transformer load forecasting”, 32nd Annual North American Power Symposium (NAPS 2000), Waterloo, Ontario, Canada, Vol. I, pp. 2-37, 2-42
• Jie Liue, M.M.A. Salama, October 2000, “Wavelet-based statistical method for identification of harmonic characteristics in electrical distribution systems”, 32nd Annual North American Power Symposium (NAPS 2000), Waterloo, Ontario, Canada, Vol. II, pp. 8-40, 8-46.
• Y.G. Hegazy, M.M.A. Salama, July 2000, “Calculations of diversified harmonic currents in multiple converter systems”, IEEE Power Engineering Society, Summer Meeting, Seattle, Washington, pp 727-731.
• A.Gaouda, S.H. Kanoun, M.M.A. Salama, A.Y. Chikhani, April 2000, “Wavelet-based intelligent system for monitoring non stationary disturbances”, 2000 Electric Deregulation and Restructuring, and Power Technologies Conference, London, UK., pp. 84- 89.
• A.Gaouda, E.F. El-Sadaany, M.M.A. Salama, V.K. Sood, A.Y. Chikhani, April 2000, “Disturbance monitoring in HVDC systems using wavelet multiresolution analysis”, 2000 Electric Deregulation and Restructuring, and Power Technologies Conference, London, UK, pp. 678-684.
• R. Elshatshat; M. Kazerani, M.M.A. Salama, April 1999, ”ADALINE-based controller for active power-line conditioners” 1999 IEEE Transmission and Distribution Conference, New Orleans, Louisiana, USA, Vol.2, pp566-571
• R. Elshatshat;  M. Kazerani, M.M.A. Salama, April 1999, “Modular active power filter approaches: Power splitting verses frequency splitting”, IEEE  1999 Canadian Conference on Electrical and Computer Engineering CCECE’99, Edmonton, Canada, pp. 1304-1308.
• Gaouda, M.M.A. Salama,  M.Sultan, October 1998 “Automated recognition system for classifying and quantifying the electric power quality”, 8th International Conference on Harmonics and Quality of Power, Athens, Greece, pp. 244-248.
• PK Dash, B. Mishra, S.K. Panda, M.M.A. Salama, September 1998, “Computation of power quality symmetrical components using fuzzy logic based linear combiners”, IEEE 1998 International Conference on Energy Management and Power Delivery,  New York, NY, pp.17-22 .
• F.E.   El Saadany, M.M.A.  Salama, June 1998, “ Sensitivity analysis for reactance one port compensator in non-linear distribution systems”, Large Engineering System Conference on Power Engineering (LESCOPE’98), Halifax, Canada, pp.101-106.
• F.E.   El Saadany, M.M.A.  Salama, A.Y.  Chikhani, May 1998, “ Comparing reactance one-port and notch filters for voltage and current harmonic reduction in non-linear distribution system” IEEE 1998 Canadian Conference on Electrical and Computer Engineering CCECE’98, Waterloo, Ontario, pp. 854-857.
• S.Kannan, S. Jayaram, M.M.A. Salama, May 1998, “Fuzzy logic based supplementary controller for static synchrounous series compensator” IEEE 1998 Canadian Conference on Electrical and Computer Engineering CCECE’98, Waterloo, Ontario, pp. 489-492.
• A.Y. Chikahani, Shahid Ismail, M.M.A. Salama, May 1998, “Analysis and comparison of harmonics of electrical system of CC130308 aircraft” IEEE 1998 Canadian Conference on Electrical and Computer Engineering CCECE’98, Waterloo, Ontario, pp. 45-48.
• R.Elshatshat, M.Kazerani, M.M.A. Salama, May 1998, “ Modular approach to active power-line harmonic filtering”, Power Electronics Specialist Conference PESC’98, Fukuoka, Japan, pp. 223-228.
• F.E.   El Saadany, M.M.A.  Salama, A.Y.  Chikhani, October 1997, “Investigation of different system parameters affecting the harmonic distortion levels in distribution systems loaded with non-linear loads” The 29th North American Power Symposium, NAPS’97, Laramie, Wyoming, pp. 121-128.
• A.M. Gaouda, M.M.A. Salama, A.Y. Chikhani, M. Sultan, October 1997, “Applications of wavelet analysis for monitoring dynamic performance in industrial plant” The 29th North American Power Symposium, NAPS’97, Laramie, Wyoming, pp. 325- 331.
• F.E.   El Saadany, M.M.A.  Salama, A.Y.  Chikhani, September   1997,  “New passive filter design for the reduction of triplen harmonics in three-phase non-linear distribution” 1997 Power Quality Conference, Baltimore, pp. 475- 480.
• Y.G. Hegazy, M.M.A. Salama, Y.A. Chikahni, September   1997, “Estimating the daily variation of distribution system harmonics using artificial neural networks”, ISIC-97, 7th International Symposium on IC technology, Systems&Application, Singapore, pp. 298-301.
• H.K. Temraz, M.M.A. Salama, A. Y. Chikhani, June 1997, “Application of model selection and construction criterion for choosing the most appropriate electric load forecasting model”, Control’97 Conference, Cancun, Mexico, pp. 82-86.
• D. Bouchard, M.M.A. Salama, A.Y. Chikhani, June 1997, “ Real-time control of power distribution switches for loss reduction”, Control’97 Conference, Cancun, Mexico, pp. 87-90
• S. Kannan, S. Jayaram, M.M.A. Salama, May 1997 “ Intelligent autonomous control of a unified power flow controller”, Submitted to the Second International Conference on Power Electronics and Derive Systems PEDS’97, Singapore, pp. 862-868
• H.K. Temraz, M.M.A. Salama, A.Y. Chikhani May 1997 “Review of electric load forecasting methods”. the 1997 Canadian Conference on Electrical and Computer Engineering CCECE’97, St. John’s, Canada, pp. 289-292.
• H.N. Ng, M.M.A. Salama, A.Y. Chikhani, May 1997 “A Survey of the application of AI in capacitor allocation and control” the 1997 Canadian Conference on Electrical and Computer Engineering CCECE’97, St. John’s, Canada, pp. 161-164.
• E.F.  El Saadany, M.M.A.  Salama, A.Y. Chikhani, April 2, 1997 “Minimization of harmonic current produced by single phase non-linear loads using passive filters”, the Twenty-ninth Annual North American Power Symposium, Chicago, pp. 475-480
• S. Kannan, S. Jayaram, M.M.A. Salama, Nov. 1996  “Application of fuzzy logic for power flow control using unified power flow controller”, Twenty Eighth Annual North American Power Symposium, Boston, pp. 437-444
• Y. Lui, M.M.A. Salama, Oct. 1996 “Investigating space charge dynamics in polymers by the improved pulsed electro-acoustic method”, 1996 IEEE International Symposium on Electrical Insulation, San Francisco.  pp. 169-173
• Y. Liu, M.M.A. Salama, June 1996, “Applying Simulation Model to uniform field space charge distribution measurements by the PEA method”, International Symposium on Electrical Insulation, Montreal, pp. 466-469.
• H.N. Ng, M.M.A. Salama, A.Y. Chikhani, June 1996, “Capacitor placement in distribution systems using fuzzy technique”, 1996 Canadian Conference on Electrical and Computer Engineering, Calgary, Alberta, pp. 790-793.
• A.I. Ibrahim, M.M.A. Salama, June 1996, “Frequency dependent network equivalent algorithm for AC power systems”, 1996 Canadian Conference on Electrical and Computer Engineering, Calgary, Alberta,  pp. 639-642.
• B.E. Bouchard, M.M.A. Salama, A.Y. Chikhani, June 1996, “Algorithms for distribution feeder reconfiguration”, 1996 Canadian Conference on Electrical and Computer Engineering, Calgary, Alberta,  pp. 794-797.
• M.M.A. Salama, A.Y. Chikhani, April 1996, “Optimum photovoltaic power system for irrigation applications”, Fourth Conference on Renewable Energy and Workshop, Cairo, Egypt.
• D.E. Bouchard, M.M.A. Salama, A.Y. Chikhani, April 1996, “Energy loss reduction in power distribution systems through system reconfiguration:  A new technique based on evaluation strategies”, Fourth Conference on Renewable Energy and Workshop, Cairo, Egypt.
• Y.Liu, M.M.A. Salama, Oct. 1995, “Space charge distribution measurements in polymers under needle-plane electrode configurations by pulsed electro-acoustic method”, 1995 Conference on Electrical Insulation and Dielectric Phenomena, Virginia Beach, Virginia,  pp. 294-297.
• M. Elsherbiny, M.M.A. Salama, Y.L. Chow, Oct. 1995, “Rodbed grounding resistances from the single driven rod resistance - The “F” multiplication factor”, IEEE Industry Application Society, 30th Annual Meeting, Orlando, Florida, pp. 1749-1757.
• Y.G. Hegazy, M.M.A. Salama, Oct. 1995, “Probabilistic representation of harmonic current produced by AC/DC static power converter”, submitted to IEEE Industry Application Society, 30th Annual Meeting, Orlando, Florida, pp. 1689-1695.
• H.N. Ng, M.M.A. Salama, Sept. 1995, “Fuzzy optimal capacitor sizing and placement”, 1995 Canadian Conference on Electrical and Computer Engineering, Montreal, Canada,  pp. 680-683.
• L. Voss, M.M.A. Salama, J. Reeve, Sept. 1995, “A practical approach to electric load forecasting using an ANN with corrective filtering”, 1995 Canadian Conference on Electrical and Computer Engineering, Montreal, Canada, pp. 370-373.
• A. Ibrahim, M.M.A. Salama, Sept. 1995, “Frequency dependent network equivalent for AC power systems using the QZ algorithm”, 1995 Canadian Conference on Electrical and Computer Engineering, Montreal, Canada,  pp. 56-59.
• Y. Hegazy, M.M.A. Salama, Sept. 1995, “Probabilistic modeling of distribution system loads for harmonic studies”, 1995 Canadian Conference on Electrical and Computer Engineering, Montreal, Canada,  pp. 697-700.
• Y.L. Chow, M.M. Elsherbiny, M.M.A. Salama, Sept. 1995, “Earth surface voltages at a grounding system of buried grid and rods from the fast Galerkin’s moment method”, 1995 Canadian Conference on Electrical and Computer Engineering, Montreal, Canada,  pp. 688-691.
• R.J. Sarfi, M.M.A. Salama, A.Y. Chikhani, Sept. 1995, “A real time fuzzy expert system for on-line electric distribution system reconfiguration for loss minimization”, 1995 Canadian Conference on Electrical and Computer Engineering, Montreal, Canada,  pp. 164-167.
• M.A. Hanna, A.Y. Chikhani, M. Baxter, M.M.A. Salama, Sept. 1995,“Thermal modeling of cables in conduits: (Air gap consideration)”, 1995 Canadian Conference on Electrical and Computer Engineering, Montreal, Canada,  pp. 578-581.
• D.E. Bouchard, M.M.A. Salama, A.Y. Chikhani, Sept. 1995 “Optimal feeder routing and optimal substation sizing and placement using guided evolutionary simulated annealing”, 1995 Canadian Conference on Electrical and Computer Engineering, Montreal, Canada,  pp. 668-691.
• R.J. Sarfi, M.M.A. Salama, A.Y. Chikhani, August 1995, “A fuzzy expert system for real-time distribution system reconfiguration for loss reduction”, The 6th International Fuzzy Systems Association World Conference, Sao Paulo, Brazil,  pp. 457-460.
• Y.L. Chow, M.M. Elsherbiny, M.M.A. Salama, A.Y. Chikhani, June 1995,            “Simulated test method for earth resistance measurements in single layer soil”, Applied Modeling, Simulation and Optimization Conference, Cancun, Mexico, pp. 89-90.
• M.A. Hanna, A.Y. Chikhani, M.M.A. Salama, June 1995, “Thermal behavior of a three-cable trench system in multi-layered soil”, Applied Modeling, Simulation and Optimization Conference, Cancun, Mexico,  pp. 293-298.
• R.J. Sarfi, M.M.A. Salama, A.Y. Chikhani, June 1995, “System optimization of electrical distribution networks: A new non-linear formulation”, Proceeding of the Applied Modeling, Simulation and Optimization Conference, Cancun, Mexico, pp. 90-94
• Y.G. Hegazy, M.M.A. Salama, April 1995, “Calculation of voltage harmonic   distortion caused by small non-linear loads”, 1995 American Power Conference, Chicago, IL,  pp. 1736-1741.
• A. Dastaviz, M.M.A. Salama, S. Jayaram, October 1994, “Effect of pre-stressing of the test objects on the discharge magnitudes in high density polyethylene”, 1994 Conference on Electric Insulation and Dielectric Phenomena,  pp. 125-130.
• S. Salamat Sharif, M.M.A. Salama, A. Vannelli, September 1994, “Optimal model for future expansion of radial distribution networks using mixed integer programming”, 1994 Canadian Conference on Electrical and Computer Engineering, Halifax, Canada, pp. 152-155.
• Y.G. Hegazy, M.M.A. Salama, Sept. 1994, “Identifying the relationship between voltage harmonic distortion and the load of harmonic producing devices in distribution networks”, 1994 Canadian Conference on Electrical and Computer Engineering, Halifax, Canada,  pp. 669-672.
• Y.G. Hegazy, S. Fouda, M.M.A. Salama, A.Y. Chikhani, Sept. 1994, “The effect of modeling on the accuracy of the estimation of harmonic voltages in distribution systems”, 1994 Canadian Conference on Electrical and Computer Engineering, Halifax, Canada,  pp. 131-135.
• M.E. Wadie, M.M.A. Salama, Sept. 1994, “A selective electrically representative heuristic approach for power network clustering”, 1994 Canadian Conference on Electrical and Computer Engineering, Halifax, Canada, pp. 169-172.
• R.J. Sarfi, M.M.A. Salama, A.Y. Chikhani, Sept. 1994, “Distribution system reconfiguration for loss reduction: A new algorithm based on a set of quantified heuristic rules”, 1994 Canadian Conference on Electrical and Computer Engineering, Halifax, Canada, pp. 125-130.
• D.E. Bouchard, A.Y. Chikhani, M.M.A. Salama, Sept. 1994, “Evolution strategies for distribution feeder planning”, 1994 Canadian Conference on Electrical and Computer Engineering, Halifax, Canada, pp. 661-664.
• Y.G. Hegazy, M.M.A. Salama, Sept. 1994, “Important issues in the evaluation of distribution system harmonics”, The Twenty-Sixth Annual North American Power Symposium, Manhattan, KS, pp. 281-285.
• Y.G. Hegazy, M.M.A. Salama, August 1994, “An efficient algorithm for identifying the structure of artificial neural networks for forecasting problems”, 37th Midwest Symposium on Circuits and Systems, August 3-5, 1994, Lafayette, Louisiana, pp. 618-621.
• M.E. Wadie, M.M.A. Salama, June 1994, “A non-linear programming approach for the design of controlled-field multi-layer insulation system”, 1994 IEEE International Symposium on Electrical Insulation, Pittsburgh, PA (Best Student’s Paper Award), pp. 221-224.
• Y. Yao, M.M.A. Salama, R.S. Ramshaw, April 1994, “Simulation of hybrid uninterrupted power supplies”, American Power Conference, 56th Annual Meeting, Chicago, pp.    .
• Amira A. Mazroua, M.M.A. Salama, R. Bartnikas, March 1994, “Pattern-based PD diagnosis system using neural networks”, Electricity’94 Conference and Exposition, CEA, Toronto, Ont., pp.271-283.  
• J.A. Barby, S.E. Rehan, M.M.A. Salama, March 1994, “A HDL approach to solving simulation and modeling problems: 2 case studies”, ASSURE’94, Stevenson, WA, pp. 43-52.
• M.M.A. Salama, A.Y. Chikhani, Oct. 1993, “A power flow algorithm for unbalanced radial distribution system”, “NAPS”, 1993 North American Power Symposium, Washington, DC, pp. 490-495.
• R.J. Sarfi, M.M.A. Salama, A. Vannelli, A.Y. Chikhani, Oct. 1993, “Loss reduction in distribution systems: A new approach using partitioning techniques”, 1993 IEEE Industry Application Society, Annual Meeting,  pp. 1439-1444.
• M.A. Hanna, A.Y. Chikhani, M.M.A. Salama, Sept. 1993, “Effect of the space between cables on the heat dissipation from underground cable systems”, 1993 Canadian Conference on Electrical and Computer Engineering, Vancouver, B.C.,  pp. 433-437.
• S.S. Fouda, M.M.A. Salama, A.Y. Chikhani, Sept. 1993, “Performance of thyristor-controlled reactor used in reactive power control”, 1993 Canadian Conference on Electrical and Computer Engineering, Vancouver, B.C., pp. 445-449.
• R.J. Sarfi, M.M.A. Salama, C. Gebotys, A.Y. Chikhani, Sept. 1993, “Applications of mixed integer programming to cathodic protection design”, 1993 Canadian Conference on Electrical and Computer Engineering, Vancouver, BC,  pp. 664-668.
• D. Bouchard, A.Y. Chikhani, M.M.A. Salama, April 1993, “Applications of Hopfield neural networks to power systems”, 2nd International Forums on Applications of Neural Networks to Power Systems (ANNPS’93), Pacifico,Yokohama, Japan,  pp.1-6.
• M.M.A. Salama, S. Fouda, J.M. Braun, October 1992, “Effect of electrical stress on sound propagation of polymeric insulating materials”, CEIDP Conference, Victoria, BC.,  pp. 351-356.
• M.M.A. Salama, A.Y. Chikhani, September 1992, “Power flow analysis for distribution systems”, 1992 Canadian Conference on Electrical and Computer Engineering, Toronto,  pp. TM 8.13.1 - TM 8.13.4.
• B.Lian, M.M.A. Salama, September 1992, “The application of modal transformation in the representation of waveform and transmission line”, 1992 Canadian Conference on Electrical and Computer Engineering”, Toronto,     pp. WM 8.25.1 - WM 8.25.4.
• B. Lian, M.M.A. Salama, September 1992, “Numerical simulation algorithm for transmission line fault locator”, 1992 Canadian Conference on Electrical and Computer Engineering, Toronto,  pp. WM 8.24.1 - WM 8.24.4.
• M.A. Hanna, A.Y. Chikhani, M.M.A. Salama, September 1992, “Heat loss calculations for underground cable system in a trench using an open-boundary finite difference technique”, 1992 Canadian Conference on Electrical and Computer Engineering, Toronto, pp. TM.8.12.1 - TM.8.12.4.
• M.A. Hanna, A.Y. Chikhani, M.M.A. Salama, August 1992, “Modeling of underground cable system in non-homogeneous soil”, 35th Midwest Symposium on Circuits and Systems, Washington, DC,  pp. 381-384.
• M.A. Hanna, A.Y. Chikhani, M.M.A. Salama and R. Hackam, August 1992, “Numerical calculation of heat dissipation from buried cables with the effect of trench dimensions and ambient temperature”, IEEE LATINCON’92, Santiago, Chile,  pp. 192-200.
• M.M.A. Salama and M.M. Sallam, June 1992, “A mathematical model for tracking time calculation for polymeric materials”, 1992 IEEE International Symposium on Electrical Insulation, Baltimore, Maryland, pp. 266-269.
• A.Y. Hannalla and M.M.A. Salama, May 1992, “Calculation of magnetic induction on buried pipeline due to their proximity to EHV transmission line”, Second IASTED International Conference on Computer Application in Industry, Alexandria, Egypt, pp. 523-526.
• M.A. Hanna, A.Y. Chikhani, M.M.A. Salama, May 1992, “Numerical calculation of heat dissipation from buried cables with the effect of trench dimensions ambient temperature”, IEEE LATINCON-92 Conference in Santiago, Chile, pp.102-106.
• M.M.A. Salama, A.Y. Chikhani and R. Hackam, March 1992, “Computer-aided insulation coordination for DC cables”, ISMM International Conference on Computer Applications in Design, Simulation and Analysis, Orlando, Florida, pp. 87-90.
• T.S. Abdel-Salam, R. Hackam, M.M.A. Salama, A.Y. Chikhani, March 1992, “A simplified loss reduction algorithm for loss reduction in distribution feeder”, ISMM International Conference on Computer Applications in Design, Simulation and Analysis, Orlando, Florida,  pp.91-94.
• M.M.A. Salama and M.A. Bayoumi, October 1991, “A computer based testing unit for power cable junctions”, International Symposium on Digital Techniques in High Voltage Measurements, Toronto, Canada,  pp. 4.8-4.12.
• M.M.A. Salama, September 1991, “Computer based fault current calculation for distribution system”, 1991 Canadian Conference on Electrical and Computer Engineering, Quebec, Canada, pp. 51.5.1-51.5.4.
• M.M.A. Salama and M.A. Sallam, August 1991, “Laboratory studies of tracking in solid dielectric”, 7th International Symposium on High Voltage Engineering, Dresden, Germany,  pp. 275-278.
• M.M.A. Salama, A.Y. Chikhani, M. El-Disoky, April 1991, “Mathematical modeling of induction machines staggering mode”, Proceedings of the 8th International Conference on Mathematical and Computer Modeling, College Park, Maryland. pp. 1234-1238.
• T.A. El-Sheikh, S.A.M. Shehata, M.M.A. Salama, A. Nosseir, February 1991, “Application of electronic sensors for temperature profile measurements, a practical and experimental study”, Proceedings of the Eighth National Radio Science Conference, NRSC’91, Cairo, Egypt,  pp. 339-346.
• T.A. El-Sheikh, H.M. Ismail, M.M.A. Salama, S.A.M. Shehata and A. Nosseir, February 1991, “Potential and field distributions about cable joints using the charge simulation technique”, Proceedings of the Eighth National Radio Science Conference, NRSC’91, Cairo, Egypt, pp. 347-356.
• M.M.A. Salama, M.A.E. Gazzer, H.M.M. Moustafa, March 1990, “Electrical loading forecasting using different methods suitable to Egyptian networks”, Proceedings of the 15th Int. Conference for Statistics and Computer Science, V. 6, Cairo, Egypt, pp. 367-385
• M.M.A. Salama, A.Y. Hanalla, November 1988, “Electromagnetic shielding effectiveness of high performance shielding enclosure”, 3rd National Physics Conference on Physics for Development, Cairo, Egypt,  pp. 1-18.
• M.M.A. Salama, November 1988, “Permissible sizes for voids and contamination in XLPE high voltage cables”, 3rd National Physics Conference on Physics for Development, Cairo, Egypt, pp. 351-367.
• M.M.A. Salama, November 1988, “Determination of corona discharge inception in compressed SF6 by electron avalanche energy”, 3rd National Physics Conference on Physics for Development, Cairo, Egypt, pp. 231-242.
• S. El-Debiky, M.M.A. Salama, A. Harrass, August 1987, “Energy level criteria for corona discharge inception”, 5th International Symposium on High Voltage Engineering, Braunschweing, Federal Republic of Germany, part 14.15, pp. 1-4.
• M.S. Rizk, R. Hackam, M.M.A. Salama, June 1986, “Calculation of the inception voltage in voids within dielectric materials”, 1986 IEEE International Symposium on Electrical Insulation, Washington, pp. 129-134.
• M.M.A. Salama, M.A. Bayoumi, April 1985, “On testing air core power reactor using microprocessors”, 16th Annual Pittsburgh Conference on Modeling and Simulation, Pittsburgh, pp. 1021-1025.
• M.M.A. Salama, A.Y. Chikhani, R. Hackam, June 1984, “Charge simulation method for calculating the electrical stress in HV multi-layers 3-core cables”, 10th IASTED International Conference on Applied Simulation and Modeling ASM 84, San Francisco,  pp. 22-25.
• M.M.A. Salama, M. Bayoumi, A.Y. Chikhani, S.I. Ahmad, June 1984, “Microprocessor based fault current limiter”, 25th International Symposium on Mini and Microcomputers and Their Applications, San Francisco,  pp. 72-74.
• A. Nosseir, M.M.A. Salama, A. Soliman, M. Rizk, June 1984, “Discharge detection and measurement in voids in solid dielectric”, 1984 IEEE International Symposium on Electrical Insulation, Montreal, Quebec, pp. 336-338.
• B. McAskill, M.M.A. Salama, A. Watson, June 1984, “Feadforward control of dynamic reactive power compensation on distribution lines”, 27th Mid-West Symposium on Circuit and Systems, Morgantown, West Virginia, pp. 395-198.
• M.M.A. Salama, M. Bayoumi, April 1984, “Microprocessor based reconfiguration line trap”, Fifteenth Annual Pittsburgh Conference on Modeling and Simulation, Pittsburgh, pp. 1603-1607.
• G. Keene, M.H. Rahman, A.Y. Chikhani, M.M.A. Salama, April 1984, “Microprocessor control of VAR compensation in distribution feeder”, Fifteenth Annual Pittsburgh Conference on Modeling. pp. 1634-1638.
• M.M.A. Salama, A.Y. Chikhani, R. Hackam, April 1984, “New methods of circuit reconfiguration to limit fault current in power systems:  A load flow and microprocessor approach”, IEEE South East Conference, Louisville, pp. 330-333.
• M.M.A. Salama, A.Y. Chikhani, R. Hackam, April 1984, “Fault current limitations by circuit reconfiguration in power systems”, IEEE South East Conference, Louisville, pp. 325-329.
• G. Keen, M.H. Rahman, M.M.A. Salama, A.Y. Chikhani, November 1983, “Microprocessor control of reactive power compensation in distribution systems”, IASTED International Symposium and Modeling, Orlando,  pp. 18-21.
• . M.M.A. Salama, A.Y. Chikhani, August 1983, “Control of reactive power in distribution systems with end load injection”, IEEE Mid-East Symposium for Power and Systems, Mexico,  pp. 492-496.
• M.M.A. Salama, A.Y. Chikhani, August 1983, “Electrical field calculation for high voltage equipment”, IEEE Mid-West Symposium for Power and Systems, Mexico, pp.  497-501.
• A.Y. Hanalla, M.M.A. Salama, A.Y. Chikhani, May 1983, “A model for calculating the electrical stress in HV stranded 3-core cables using charge simulation technique”, IASTED International Symposium, Applied Simulation and Modeling, AMS 83, San Francisco, pp.182-185.
• M.M. El Sherbiny, M.M.A. Salama, M.E. El-Said, May 1983, “Photovoltatic pumping system”, The Relation Between Major World Problems and Systems Learning, Society for General Systems Research, Detroit, Michigan, pp. 779-783.
• M.H. El-Said, M.M.A. Salama, E.A.A. Mansour, November 1982, “Compensation system for dynamic reactive loads on radial feeders”, IEEE International Electrical Engineering Conference and Show MEXICON 82, Mexico, pp. 1-5.
• M.M.A. Salama, A. Nosseir, October 1982, “Townsend breakdown criterion in electronegative gases”, Conference on Electrical Insulation and Dielectric Phenomena, Amherst, Maine, pp. 418-423.
• M.M.A. Salama, A.A. El-Sttar, September 1982, “Initial voltage distribution in transformer windings due to lightning surges”, International Conference on Electrical Machines, Budapest, pp. 686-688.
• M.M.A. Salama, E.A. Mansour, July 1982, “Mathematical model for fixed capacitor allocation on primary feeder for maximum net savings”, International Association for Technology and Development, ICD, Tunis, pp. 151-154.
• T. El-Shiekh, M.M.A. Salama, A. Soliman, A. Nosseir, March 1982, “Electrical stress analysis for three core cables”, 7th International Congress for Statistics, Computer Science, Social and Demographic Research, Cairo, Egypt, pp.465-475.
• M.M.A. Salama, E.A.A. Mansour, October 1981, “New look at ASTM tracking test methods for polymer”, IEEE Electrical/Electronic Insulation Conference, Chicago, pp. 181-182.
• A.H. Amer, M.M.A. Salama, E.A.A. Mansour, September 1981, “Optimum value of reactive compensation with controlled rectifier for radial distribution”, IEEE International Conference and Show MEXICON 81, Guadalajara, Mexico, pp. 645-549.
• M.M.A. Salama, A.R. El-Wafa, A.Y. Chikhani, September 1981, “Calculation of the electrical power dump to a metallic rebar mesh adjacent to large power reactor”, IEEE International Electric Engineering Conference and Show MEXICON 81, Guadalajara, Mexico, pp.377-382.
• M.M.A. Salama, September 1981, “A practical model for shielding high voltage equipment with polymer enclosure”, Applied Modeling and Simulation AMS 81, Lyon, France, pp. 10-13.
• M.M.A. Salama, March 1981, “Computer assisted design for high voltage electrode for capacitive voltage transformers”, 6th International Congress for Statistics, Computer Science, Social and Demographic Research, Cairo, Egypt, pp.161-172.
• H.Z Tadros, M.M.A. Salama, November 1980, “Application of recursive estimation to solar energy”, 3rd IFAC Conference on System Approach for Development, Rabat, Morocco, pp. 293-295.
• M.M.A. Salama, H.Z Tadros, March 1980, “Calculation of critical parameters in breakdown of long air gap using digital computers”, 5th International Congress for Statistics, Computer Science, Social and Demographic Research, Cairo, Egypt, pp. 127-144.
• M.M.A. Salama, March 1980, “Finite difference solution of electric potential calculated by digital computer”, 5th International Congress for Statistics, Computer Science, Social and Demographic Research, Cairo, Egypt, pp. 195-220.
• M.M.A. Salama, November 1979, “Electrical field computation for some practical electrode configuration”, 5th Conference of Automatic Control and System Engineering, Cairo, Egypt, pp. 228-237.
• H. Parekh, M.M.A. Salama, K.D. Srivastava, January 1978, “Physical models of corona onset and breakdown in non-uniform air gaps”, IEEE Power Engineering Society, PES, Paper # A-78 1190, Winter Meeting, New York.
• M.M.A. Salama, H. Parekh, K.D. Srivastava, October 1976, “A review of physical models of corona onset and breakdown in non-uniform air gaps”, 1976 IEEE Canadian Conference on Communication and Power, Montreal, Canada, IEEE Pub. 76CH1126-2, pp. 407-410.
• R.M. Radwan and M.M.A. Salama, “Calculation of breakdown voltages of electronegative gases (SF6 and CL2CF2)”, IEEE Power Engineering Society, PES, Paper # C75 076-5, Winter Meeting, New York, Jan. 1975.

 

 

University of Waterloo
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4567

contact us | give us feedback | http://www.uwaterloo.ca